In the current generation, it has been identified that, the amount of waste generated is increasing at an alarming rate. There are many organizations which helps in recycling the waste, however, the rate of recycling waste is unable to overcome the waste generated. There are many types of recycling work can be done using the common household waste in order to teach a kid about recycling. If this habit is being taught from the beginning, then it will help the kid to grow a creative mind. Here we will be discussing about the various kinds of objects which kids can make using common house hold waste. We will also describe about the precautions which needs to be taken, and along with that, the description will also contain added suggestions which will help in upgrading the object in the future. If you need MBA essay writing service then visit us.
The first task which we will perform is with the plastic bottles which we have laying around the house. We can use a black marker in order to draw the outline for the design in the bottle. It would not matter, if we use coloured plastic bottles. Once the outline has been made for the design, next we will use the colours. In order to paint the plastic bottles, we will be using acrylic colours, which will remain on the plastic bottles for a longer period of time. Once we have done with the painting, we will use the black acrylic paint in order to mark the borders, so that, the colours and design comes forward. In order to make upgrade in the plastic bottles, we can use them as pots for plants. For that, we would require adult supervision in order to cut the top portion of the bottle, and fill it with sand. Then plant a seed and make sure to water them regularly. Try our rate my paper tool to rate your paper online.
The next task or object which we will make is photo frames using popsicle sticks. In order to proceed with that, we need to first collect all the sticks and wash them properly with water. Next, we need to lay them on sunlight for an entire day, so that, all the moisture is being taken out from them, else they will bend easily and would not be used properly. Once the sticks have been dried completely, we will use acrylic paints on them in order to colour. We will use a variety of colours in order to make it look bright. Once the popsicle sticks have been coloured and dried, we will stick them using an adhesive and form a square. After that, we will also stick the popsicle sticks in the below, so that the square frame will be able to stand. After that, we will take photos and stick them behind the square frame and decorate them as per our choice. In order to upgrade this object, we can make use glitters around the sticks to make them sparkle during day time. Use our paraphrasing tool which generate unique contents.
The next object which we will make is a shoe box storage. As we can see, we would be requiring shoe boxes in order to begin with. We will wrap around colourful chart papers on the shoe box. If required, we can also design on the chart papers and then use normal paint in order to make them look colourful. For the beginning part, we can use three shoe boxes. We should also need a carton in order to place the shoe boxes in side them. It would be helpful if the cartons are in rectangular shape. We should also cover the inside of the shoe box with white chart paper. We should stick the chart paper around the shoe box using tape or glue. We would also need to cover the carton using a colour chart paper and stick it with tape or glue. Next, we will add card board pieces inside the carton so that it creates separation among the shoe boxes. We will also stick those pieces using tape or glue. After that, we will put the shoe boxes inside the carton.
The next task or object is one of the easiest and very useful things. We will make the book marks which helps us to mark the page till which we have read in the book. In order to make the book marks, we will use hard paper with a rough texture. We will cut out a small rectangular piece out of it. After that, we will punch a hole on one of the either side of the paper. After that, we will draw a design and paint the paper entirely on both sides. We will leave it under the sun to let the paint dry out. After that, we will take a ribbon and cut it on a short length. We will tie the ribbon on the paper through the punch hole and then use it as a book mark.
The next task would require adult supervision. However, the object we would be making is very useful during the night. We would be making lanterns out of tin can. The process is very easy; however, an adult should be available to help. In order to proceed we would require empty paint cans or any other type of cans. Then the adult would use a hammer and a nail in order to make holes inside the tin can. The holes need to be made around the tin can and a slightly bigger hole on the top of the can. On the top hole, the adult will insert two electric wire and attach a socket for a bulb inside the tin. The holes made, should be made using a design. If required a marker can be used. Then the tin can will be suspended from a height using a rope, and the electric wire will be inserted into the socket. Then a bulb will be connected inside the tin can, and once the light is turned on the light will come out of the pattern.
We ensure that you maintain direct communication with our writers. This way you can approach our writers whenever you have any instructions and suggestions to provide.
We are widely acknowledged for our supreme quality yet inexpensive services. This means even budget constraints will not stop you from availing our world class services.
With our round the clock customer service, none of your concerns or queries will ever go unheard. You can approach our executives any time to get assured solutions.
We work with the belief that your assignments should be perfect. Our experts carry out extensive research and follow all the best practices to provide you a top quality paper.